In the previous post we described top of the line 3M’s Vinyl Film Wrap IJ280 and Gloss Wrap Overlaminate 8428G. Let’s delve into the details of the competitor, Avery Dennison DOL Max Series, a cutting-edge line of digital overlaminate films designed to elevate graphics protection and durability.

 

 

  1. DOL 1060 Max:

    • Vertical Durability: Up to 7 years.
    • Horizontal Durability: Up to 2 years.
    • Film Thickness: 2.1 mil (53 microns) cast film.
    • Finish: Super smooth high gloss.
    • Applications: Ideal for exterior use, including fleet graphics, vehicle wraps, marine applications, and outdoor signage.
    • Key Benefits: Provides maximum protection against environmental elements, UV exposure, scratches, and abrasion.

  2. DOL 1360 Max:

    • Optically Clear and High Gloss: Ensures crystal-clear visibility.
    • Vertical Durability: Up to 7 years.
    • Horizontal Durability: Up to 2 years.
    • Film Thickness: 1.3 mil (32 microns) cast film.
    • Fire Rating: ASTM E84 Class 1 or A rating.
    • Common Choice for Vehicle Wraps: Perfect for maintaining clarity and protection on vehicle surfaces.

  3. Pairing with Avery Dennison MPI 1105 Wrapping Films:

    • When combined with Avery Dennison MPI 1105 wrapping films, the DOL Max overlaminates create a robust shield against tough conditions.
    • Achieve long-lasting graphic performance with confidence.

Remember, these films aren’t just about protection—they’re about preserving your creative vision!

Most important to keep in mind that any great graphics installation products must be installed correctly hence here are some valuable tips to ensure a successful application:

  1. Surface Preparation:

    • Cleanliness is Key: Begin with a thoroughly cleaned surface. Remove any dirt, dust, or contaminants that could affect adhesion.
    • Smooth and Dry: Ensure the surface is smooth and dry. Rough or uneven surfaces may impact the final result.

  2. Temperature and Environment:

    • Ideal Temperature: Install the DOL Max Series in an environment with a temperature range of 50°F to 90°F (10°C to 32°C).
    • Avoid Extreme Heat or Cold: Extreme temperatures can affect film performance. Avoid installation during very hot or freezing conditions.

  3. Application Techniques:

    • Squeegee Technique: Use a high-quality squeegee to apply even pressure during installation. Start from the center and work outward.
    • Heat Assistance: For complex curves or recessed areas, use a heat gun to aid in conforming the film.
    • Overlap Edges: When overlapping panels, ensure a slight overlap (about 1/8 inch) for seamless results.

  4. Trimming and Cutting:

    • Precision Matters: Use a sharp blade or knife to trim excess film. Clean, precise cuts enhance the final appearance.
    • Avoid Overcutting: Be cautious not to cut into the underlying graphic or paint.

  5. Post-Installation Inspection:

    • Check for Bubbles or Wrinkles: Inspect the entire surface for any bubbles, wrinkles, or imperfections. Address them promptly.
    • Edges and Corners: Pay attention to edges and corners—they should be securely adhered.

  6. Pairing with Avery Dennison MPI 1105 Wrapping Films:

    • When combining the DOL Max Series with Avery Dennison MPI 1105 wrapping films, follow the same installation guidelines for both layers.

We, professional installers in the Great Toronto Area and nationwide, are always open to advice you for the best products and materials in the vinyl graphics industry and do the installation of your project within right costs and timing. Please contact us for any of your installation needs here.